wiki:

Concatenate


Version 12 (modified by evilsoup, 7 years ago) (diff)

Added in usage for the concat filter, and did my bit against the dreaded link rot

If you have media files with exactly the same codec and codec parameters you can concatenate them as described in "1. Concatenation of files with same codecs". If you have media with different codecs you can concatenate them as described in "2. Concatenation of files with different codecs" below.

1. Concatenation of files with same codecs

Description

The concat demuxer was added to ffmpeg 1.1 . You can read about it in the documentation

Instructions

Create a file "mylist.txt" with all the files you want to have concatenated in the following form ( Lines starting with a dash are ignored ) :

# this is a comment
file /path/to/file1
file /path/to/file2
file /path/to/file3

then you can encode your files with:

ffmpeg -f concat -i mylist.txt -c copy output

2. Concatenation of files with different codecs

Description

The concat filter is available in recent versions of ffmpeg. Here is the official documentation.

Instructions

This is easiest to explain using an example:

ffmpeg -i input1.mp4 -i input2.webm \
-filter_complex '[0:0] [0:1] [1:0] [1:1] concat=n=2:v=1:a=1 [v] [a]' \
-map '[v]' -map '[a]' <encoding options> output.mkv

On the -filter_complex line, the following:

'[0:0] [0:1] [1:0] [1:1]

tells ffmpeg what streams to send to the concat filter; in this case, streams 0 and 1 from input 0 (input1.mp4 in this example), and streams 0 and 1 from input 1 (input2.webm).

concat=n=2:v=1:a=1 [v] [a]'

This is the concat filter itself. n=2 is telling the filter that there are two input files; v=1 is telling it that there will be one video stream; a=1 is telling it that there will be one audio stream. [v] and [a] are names for the output streams, to allow the rest of the ffmpeg line to use the output of the concat filter.

Note that the single quotes ' ' around the whole filter section are required.

-map '[v]' -map '[a]'

This tells ffmpeg to use the results of the concat filter rather than the streams directly from the input files.

Note that filters are incompatible with stream copying; you can't use -c copy with this method. Also, I'm not sure whether softsubs are supported.

As you can infer from this example, multiple types of input are supported, anything readable by ffmpeg should work. The inputs have to be of the same frame size, and a handful of other attributes have to match.

3. Concatenation of files with different codecs using an external script

Description

The following script can be used to concatenate multiple input media files (containing audio/video streams) into one output file (just like as if all the inputs were played in a playlist, one after another). It is based on this FAQ item: How can I join video files, which also contains other useful information.

If you find any bugs, feel free to correct the script, add yourself to the list of contributors and change the version string to reflect your change(s) or email the author with your patch, whatever you find more convenient.

Instructions

Save the script in a file named "mmcat" (or some other name), make it executable (chmod +x mmcat) and run it, using the syntax:

./mmcat <input1> <input2> <input3> ... <output>

If you get an error like this:

#/tmp/mcs_v_all: Operation not permitted

that could mean that you don't have correct permissions set on /tmp directory (or whatever you set in TMP variable) or that decoding of your input media has failed for some reason. In this case, it would be the best to turn on the logging (described in the script's comments)

Script

#!/bin/bash

################################################################################
#
# Script name: MultiMedia Concat Script (mmcat)
# Author: burek (burek021@gmail.com)
# License: GNU/GPL, see http://www.gnu.org/copyleft/gpl.html
# Date: 2012-07-14
#
# This script concatenates (joins, merges) several audio/video inputs into one
# final output (just like as if all the inputs were played in a playlist, one
# after another).
#
# All input files must have at least one audio and at least one video stream.
# If not, you can easily add audio silence, using FFmpeg. Just search the
# internet for "ffmpeg add silence".
#
# The script makes use of FFmpeg tool (www.ffmpeg.org) and is free for use under
# the GPL license. The inspiration for this script came from this FAQ item:
# http://ffmpeg.org/faq.html#How-can-I-join-video-files_003f
#
# If you find any bugs, please send me an e-mail so I can fix it.
#
################################################################################
#
# General syntax: mmcat <input1> <input2> <input3> ... <output>
#
# For example: mmcat file1.flv file2.flv output.flv
# would create "output.flv" out of "file1.flv" and "file2.flv".
#
################################################################################

# change this to what you need !!!
EXTRA_OPTIONS='-vcodec libx264 -crf 23 -preset medium -acodec aac -strict experimental -ac 2 -ar 44100 -ab 128k'

################################################################################
#
# NO NEED TO TOUCH ANYTHING AFTER THIS LINE!
#
################################################################################

# the version of the script
VERSION=1.3

# location of temp folder
TMP=/tmp

################################################################################

echo "MultiMedia Concat Script v$VERSION (mmcat) - A script to concatenate multiple multimedia files."
echo "Based on FFmpeg - www.ffmpeg.org"
echo "Don't forget to edit this script and change EXTRA_OPTIONS"
echo ""

################################################################################
# syntax check (has to have at least 3 params: infile1, infile2, outfile
################################################################################
if [ -z $3 ]; then
	echo "Syntax: $0 <input1> <input2> <input3> ... <output>"
	exit 1
fi

################################################################################
# get all the command line parameters, except for the last one, which is output
################################################################################
# $first  - first parameter
# $last   - last parameter (output file)
# $inputs - all the inputs, except the first input, because 1st input is
#           handled separately
################################################################################
first=${@:1:1}
last=${@:$#:1}
len=$(($#-2))
inputs=${@:2:$len}

# remove all previous tmp fifos (if exist)
rm -f $TMP/mcs_*

################################################################################
# decode first input differently, because the video header does not have to be
# kept for each video input, only the header from the first video is needed
################################################################################
mkfifo $TMP/mcs_a1 $TMP/mcs_v1

ffmpeg -y -i $first -vn -f u16le -acodec pcm_s16le -ac 2 -ar 44100 $TMP/mcs_a1 2>/dev/null </dev/null &
ffmpeg -y -i $first -an -f yuv4mpegpipe -vcodec rawvideo $TMP/mcs_v1 2>/dev/null </dev/null &

# if you need to log the output of decoding processes (usually not necessary)
# then replace the "2>/dev/null" in 2 lines above with your log file names, like this:
#ffmpeg -y -i $first -vn -f u16le -acodec pcm_s16le -ac 2 -ar 44100 $TMP/mcs_a1 2>$TMP/log.a.1 </dev/null &
#ffmpeg -y -i $first -an -f yuv4mpegpipe -vcodec rawvideo $TMP/mcs_v1 2>$TMP/log.v.1 </dev/null &

################################################################################
# decode all the other inputs, remove first line of video (header) with tail
# $all_a and $all_v are lists of all a/v fifos, to be used by "cat" later on
################################################################################
all_a=$TMP/mcs_a1
all_v=$TMP/mcs_v1
i=2
for f in $inputs
do
	mkfifo $TMP/mcs_a$i $TMP/mcs_v$i

	ffmpeg -y -i $f -vn -f u16le -acodec pcm_s16le -ac 2 -ar 44100 $TMP/mcs_a$i 2>/dev/null </dev/null &
	{ ffmpeg -y -i $f -an -f yuv4mpegpipe -vcodec rawvideo - 2>/dev/null </dev/null | tail -n +2 > $TMP/mcs_v$i ; } &

	# if you need to log the output of decoding processes (usually not necessary)
	# then replace the "2>/dev/null" in 2 lines above with your log file names, like this:
	#ffmpeg -y -i $f -vn -f u16le -acodec pcm_s16le -ac 2 -ar 44100 $TMP/mcs_a$i 2>$TMP/log.a.$i </dev/null &
	#{ ffmpeg -y -i $f -an -f yuv4mpegpipe -vcodec rawvideo - 2>$TMP/log.v.$i </dev/null | tail -n +2 > $TMP/mcs_v$i ; } &

	all_a="$all_a $TMP/mcs_a$i"
	all_v="$all_v $TMP/mcs_v$i"
	let i++
done

################################################################################
# concatenate all raw audio/video inputs into one audio/video
################################################################################
mkfifo $TMP/mcs_a_all
mkfifo $TMP/mcs_v_all
cat $all_a > $TMP/mcs_a_all &
cat $all_v > $TMP/mcs_v_all &

################################################################################
# finally, encode the raw concatenated audio/video into something useful
################################################################################
ffmpeg -f u16le -acodec pcm_s16le -ac 2 -ar 44100 -i $TMP/mcs_a_all \
       -f yuv4mpegpipe -vcodec rawvideo -i $TMP/mcs_v_all \
	$EXTRA_OPTIONS \
	$last

################################################################################
# remove all fifos
################################################################################
rm -f $TMP/mcs_*

Attachments (2)

Download all attachments as: .zip